Bundle Installation on CentOS

perfSONAR combines various sets of measurement tools and services bundled in different useful ways. RPMs are available that install the bundles described in perfSONAR Installation Options. The steps in the remaining sections of this document detail the steps required for installing these bundles.

System Requirements

  • Operating System:

    • CentOS 7 x86_64 installations are supported. Other RedHat-based operating systems may work, but are not officially supported at this time.

    • See Hardware Requirements for hardware requirements and more.

Note

Installing a graphical/desktop environment with perfSONAR is not supported. These environments generally come with a Network Manager that conflicts with the way that perfSONAR is tuning the network interface parameters. We recommend doing only server grade OS installs.

Installation

Step 1: Configure Yum

Note

If your system is using yum priorities make sure that repositories required for perfSONAR are higher priority than anything else to avoid conflicts with older versions. Please note that yum maintainers do not recommend using priorities.

The process configures yum to point at the necessary repositories to get packages needed for perfSONAR. You will need to follow the steps below as privileged user:

  1. Install the EPEL RPM:

    yum install epel-release

  2. Install the perfSONAR-repo RPM:

    yum install http://software.internet2.edu/rpms/el7/x86_64/latest/packages/perfSONAR-repo-0.10-1.noarch.rpm

  3. Refresh yum’s cache so it detects the new RPMS:

    yum clean all

Step 2: Install a Bundle

CHOOSE ONE of the following bundles and see perfSONAR Installation Options page for more information about what these bundles are.

  • perfSONAR Tools:

    yum install perfsonar-tools

  • perfSONAR Test Point:

    yum install perfsonar-testpoint

  • perfSONAR Core:

    yum install perfsonar-core

  • perfSONAR Archive:

    yum install perfsonar-archive

  • perfSONAR Toolkit:

    yum install perfsonar-toolkit

Optional Packages

In addition to any of the bundles above you may also optionnally choose to install one or more of our add-on packages (these are automatically added on the perfsonar-toolkit bundle):

  • yum install perfsonar-toolkit-ntp - Automatically detects closest NTP servers and sets them in ntp.conf

  • yum install perfsonar-toolkit-security - Adds default firewall rules and installs fail2ban

  • yum install perfsonar-toolkit-servicewatcher - Adds a cron job that checks if services are still running.

  • yum install perfsonar-toolkit-sysctl - Adds default sysctl tuning settings

  • yum install perfsonar-toolkit-systemenv-testpoint - Configures auto-update and set some default logging locations

You may also run the command below to get everything listed above on perfsonar-testpoint and perfsonar-core bundles:

/usr/lib/perfsonar/scripts/install-optional-packages.py

Step 3: Verify NTP and Tuning Parameters

Step 3 can be ignored for perfsonar-toolkit package installation as its instructions are included and run automatically

  • NTP Tuning

    • Auto-select NTP servers based on proximity

      The Network Time Protocol (NTP) is required by the tools in order to obtain accurate measurements. Measurements will not give accurate results unless NTP is configured. If an optional package was installed, then run:

      /usr/lib/perfsonar/scripts/configure_ntpd new
systemctl restart ntpd

    You can verify if NTP is running with the following command:

    /usr/sbin/ntpq -p

  • System Tuning

    It is important to make sure that your host is properly tuned for maximum TCP performance on the WAN. You should verify that htcp, not reno, is the default TCP congestion control algorithm, and that the maximum TCP buffers are big enough for your paths of interest. You can also re-run this script any time you need e.g. when host interface speed changes.

    • Configure perfSONAR sysctl settings

      If the optional package was installed, then run:

      /usr/lib/perfsonar/scripts/configure_sysctl

    • Advanced Manual Tuning

      For more information please refer to http://fasterdata.es.net/host-tuning/linux/

Step 4: Firewall and Security Considerations

Package Install

If you have installed the perfsonar-toolkit-security package, then you can configure the firewalld / IPTable entries by running:

/usr/lib/perfsonar/scripts/configure_firewall install

The package also installs fail2ban.

Or, if you would like to configure the rules manually, then please review the document here on the ports that need to be open.

Additionally, pscheduler allows you to limit the parameters of tests such as duration and bandwidth based on the requesters IP address. It does this through the /etc/pscheduler/limits.conf. ESnet provides a file containing all R&E subnets, which is updated nightly. Instructions on how to download this file and configure pScheduler to use it are described on the page Limiting Tests to R&E Networks Only.

Note that the perfsonar-toolkit-security package is automatically included in the perfsonar-toolkit bundle.

Step 5: Auto updates

You can also enable yum ‘auto updates’ to ensure you always have the most current and hopefully most secure packages. To do this follow the steps in Managing Automatic Updates from the Command-Line.

Note

Automatic updates are enabled by default in the perfSONAR Toolkit.

Step 6: Service Watcher

The perfsonar-toolkit-servicewatcher installs scripts that check if important processes are running and restarts if they have stopped unexpectedly.

The install automatically configures cron to run the service_watcher regularly.

To run the script manually, run:

/usr/lib/perfsonar/scripts/service_watcher

Step 7: Register your services

Note: this step can be done through the web interface if the perfsonar-toolkit bundle was installed. See Updating Administrative Information.

No actual configuration is required but filling fields such as administrator_email, site_name, city, country, latitude, longitude, etc. are highly recommended. You can add these by removing the leading # of any property and filling it out with a proper value for your host. Changes will be picked-up automatically without need for any restarts.

Step 8: Starting your services

All services should be started after install. Additionally, you can start all the services by rebooting the host since all are configured to run by default. In order to check services status issue the following commands:

systemctl status pscheduler-scheduler
systemctl status pscheduler-runner
systemctl status pscheduler-archiver
systemctl status pscheduler-ticker
systemctl status psconfig-pscheduler-agent
systemctl status owamp-server
systemctl status perfsonar-lsregistrationdaemon

If they are not running you may start them with appropriate init commands as a root user. For example:

systemctl start pscheduler-scheduler
systemctl start pscheduler-runner
systemctl start pscheduler-archiver
systemctl start pscheduler-ticker
systemctl start psconfig-pscheduler-agent
systemctl start perfsonar-lsregistrationdaemon
systemctl start owamp-server

In order to find more information about services running in perfSONAR bundles visit Managing Daemons.

Configuring an Archive

If you installed the perfsonar-archive bundle see the following document Deploying a Central Measurement Archive