esmond API Reference

This document describes the basics of reading and writing data from the perfSONAR measurement archive. The measurement archive implements a REST interface where clients can retrieve descriptions of measurements being run and the results of those measurements. It currently offers support for a range of measurements related to throughput, packet delay, packet loss, packet traces and more (with additional data types being added all the time). This document is intended to give developers a basic programming language-neutral understanding of how to interact with the archive.

Querying Data

Getting Started

Querying the measurement archive generally follows the two-step process below: #. Find the measurements with the type of data you want #. Retrieve the result data for the measurements you find

A quick example helps illustrate this process. First, let’s say we we want to know about throughput for a particular set of measurements. In perfSONAR we call this the type of data we are interested-in the event type. Let’s say we also only want throughput for measurements between two hosts where the host host1.example.net sends data to host2.example.net. Since host1.example.net sends the data we consider it a source and since host2.example.net receives data we call it the destination. Assuming our measurement archive runs on archive.example.net we can send the following HTTP GET using curl to get the results we want:

curl http://archive.example.net/esmond/perfsonar/archive/?event-type=throughput&source=host1.example.net&destination=host2.example.net

This returns the following JSON object:

[
    {
        "source":"10.1.1.1",
        "destination":"10.1.1.2",
        "event-types":[
            {
                "base-uri":"/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/packet-retransmits/base",
                "event-type":"packet-retransmits",
                "summaries":[],
                "time-updated":1397482734
            },
            {
                "base-uri":"/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/throughput/base",
                "event-type":"throughput",
                "summaries":[
                    {
                    "summary-type":"average",
                    "summary-window":"86400",
                    "time-updated":1397482735,
                    "uri":"/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/throughput/averages/86400"
                    }
                ],
                "time-updated":1397482735
            },
            {
                "base-uri":"/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/failures/base",
                "event-type":"failures",
                "summaries":[],
                "time-updated":1397315930
            },
            {
                "base-uri":"/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/throughput-subintervals/base",
                "event-type":"throughput-subintervals",
                "summaries":[],
                "time-updated":1397482735
            }
        ],
        "input-source":"host1.example.net",
        "input-destination":"host2.example.net",
        "ip-transport-protocol":"tcp",
        "measurement-agent":"10.1.1.1",
        "metadata-key":"f6b732e9f351487a96126f0c25e5e546",
        "subject-type":"point-to-point",
        "time-duration":"20",
        "time-duration":"14400",
        "tool-name":"bwctl/iperf3",
        "uri":"/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/"
    }
]

Notice we get back an array of objects. In the example above there is just one measurement that matches our search. Notice the source and destination are IP addresses. The archive always stores IP addresses for a measurement but will automatically do any required conversions if you provided DNS names in your search. Also notice there are multiple event-types where one of them matches our search. These other event-types are other data available for the measurement. We just want throughput so we look at the object where event-type is throughput and extract the base-uri field which is /esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/throughput/base. We can then query the last 24 hours (i.e. 86,400 seconds) of throughput measurements with the following HTTP GET request:

curl http://archive.example.net/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/throughput/base?time-range=86400

This returns the following list of datapoints where the ts is the time the measurement started and value is the throughput measured in bits per second:

[
    {
        "ts":1397421672,
        "val":7016320000.0
    },
    {
        "ts":1397442692,
        "val":7225480000.0
    },
    {
        "ts":1397466492,
        "val":7095460000.0
    },
    {
        "ts":1397482700,
        "val":7042540000.0
    }
]

The example above glosses over many details and options, but outlines the normal workflow for querying data. See the remainder of this section for further details on more advanced queries and data types.

Finding the right measurements

Finding measurements with parameters relevant to the data you are seeking is the first step in querying the measurement archive. All searches of this type go to the top-level URL (usually /esmond/perfsonar/archive) and you can use HTTP GET parameters to filter the results. Almost any parameter in the measurement objects returned can be used as a search filter. If no results match your search you will get back an empty list. If one or more measurements match your search, you will get back a list of objects describing the measurements called metadata. This information includes URIs where you can get the measurement results. Fields and filters common to all measurement objects are listed in the table below:

Field name

Type

Description

source

IP address

The sender in a point-to-point measurement represented as an IPv4 or IPv6 address. When searching you can provide a DNS name and the server will automatically map it to the correct IP address. See Searching by Endpoint for more information.

destination

IP address

The receiver in a point-to-point measurement represented as an IPv4 or IPv6 address. When searching you can provide a DNS name and the server will automatically map it to the correct IP address. See Searching by Endpoint for more information.

measurement-agent

IP address

The host where the measurement was initiated represented as an IPv4 or IPv6 address. This may be the source, destination or a third-party host depending on the tool. When searching you can provide a DNS name and the server will automatically map it to the correct IP address. See Searching by Endpoint for more information.

input-source

string

A string indicating exactly how the source address is passed to the tool. You SHOULD NOT search on this field, use the source instead. This field is for informational purposes only to indicate whether the underlying tool running the measurement (e.g. bwctl, owping, ping) is passed a DNS name or IP when it runs. While searching is not strictly prohibited, you should almost never search on this field. The source is better since it will do DNS to IP mappings and will provide more consistent results.

input-destination

string

A string indicating exactly how the destination address is passed to the tool. You SHOULD NOT search on this field, use the destination instead. See input-source above for a complete discussion.

tool-name

string

A string indicating the name of the tool that produced the measurement. Examples include bwctl/iperf, bwctl/iperf or powstream.

In addition to the fields above, specific measurement types can have context-specific fields that are searchable. A list of these fields is available in the API specification. Examples and more information on common searches are provided in the remainder of this section.

Listing all the measurements

Perhaps the simplest query one can perform is to list all the measurement metadata for which an archive has data. You can do this by querying the top level URI with no GET filters:

curl "http://archive.example.net/esmond/perfsonar/archive/"

Searching by Endpoint

It is common to want to search by the endpoints of a point-to-point test. The archive provides two fields for this: source and destination. These fields are always stored as an IPv4 or IPv6 address depending on the type of address used in the actual measurement. If you provide just the source, all tests that send data from the given host will be returned. Likewise, if you provide just the destination the all hosts receiving data at the particular host will be returned. If both are provided, only tests between the given source and destination will be returned. Examples:

Match all measurement metadata with source 10.1.1.1

curl "http://archive.example.net/esmond/perfsonar/archive/?source=10.1.1.1"

Match all measurement metadata with destination 10.1.1.2

curl "http://archive.example.net/esmond/perfsonar/archive/?destination=10.1.1.2"

Match all measurement metadata with source 10.1.1.1 AND destination 10.1.1.2

curl "http://archive.example.net/esmond/perfsonar/archive/?source=10.1.1.1&destination=10.1.1.2"

Furthermore, when providing a filter in the GET parameters you may provide a DNS name which the server will automatically convert to an IP address before performing the search. This is an enhancement over previous versions of the measurement archive where it was required to know exactly how an address was stored. The DNS name may be a CNAME or have A and/or AAAA records directly. For example, assume the hostname host1.example.net has an A record of 10.1.1.1. We can match all tests where 10.1.1.1 is the source with the following:

curl "http://archive.example.net/esmond/perfsonar/archive/?source=host1.example.net"

There is also a special filter for controlling the behavior of the DNS lookups. By default, it will perform DNS lookups for both A and AAAA records. That means if you have two tests involving the same endpoint where one uses IPv4 addresses, the other uses IPv6 addresses AND you provide a hostname with both A and AAAA record, then you will both tests returned by your search. You can control this one of two ways: #. Always search using the IP address in the form you wish to match. i.e. Searching with an IPv6 address will only return IPv6 results, searching with the IPv4 address returns only IPv4 results. #. Use the special dns-match-rule filter in your GET parameters. The dns-match-rule parameter controls what DNS lookups the server will perform and accepts the following options:

Value

Description

v4v6

Default. Looks up both A and AAAA records and returns both the IPv4 and IPv6 tests it finds.

only-v4

Only performs a A record lookup for a given hostname and thus only returns results matching the IPv4 address.

only-v6

Only performs a AAAA record lookup for a given hostname and thus only returns results matching the IPv6 address.

prefer-v4

Tries an A lookup first but if that fails, tries a AAAA lookup. If the initial A lookup succeeds, only IPv4 results are returned.

prefer-v6

Tries an AAAA lookup first but if that fails, tries a A lookup. If the initial AAAA lookup succeeds, only IPv6 results are returned.

A quick example that returns only results with a source that matches the AAAA record of host1.example.net is below:

curl "http://archive.example.net/esmond/perfsonar/archive/?source=host1.example.net&dns-match-rule=v6-only"

Searching by Event Type

Another common desire is to search for only those measurements with a particular type of data. There is a special filter called event-type that returns this information. This will return any measurement metadata object that has an item in its event-types list where the event-type field equals the provided value. For example, to return only those measurements containing throughput data one could run:

curl "http://archive.example.net/esmond/perfsonar/archive/?event-type=throughput"

Event types may also contain summaries. There are multiple types of summaries as described in Base Data vs Summaries. For example, an average summary may take the statistical average of all the measurements over a 24 hour period and post that value to a single data point. This allows for faster retrieval of long ranges of data by reducing the number of datapoints returned. A summary may perform some type of transformation such as a statistics summary that takes a histogram object and returns common statistical measures. There are two relevant fields for a summary: the summary-type (which is either aggregation, average or statistics) and summary-window which is the time range (in seconds) that is summarized. Summaries are defined when metadata is created so you can’t expect all data to have summaries nor for a summary to be available for a particular time window unless it is explicitly listed in the metadata. For example, we can search for all one-way delay histogram (event type histogram-owdelay) with 24 hour statistical summaries as follows:

curl "http://archive.example.net/esmond/perfsonar/archive/?event-type=histogram-owdelay&summary-type=statistics&summary-window=86400"

Summaries are explained in more detail in the section Base Data vs Summaries.

Searching by most recent result time

The previous examples will return all measurement metadata regardless of whether they have received any new data recently. In some cases this is fine, but its often useful to filter-out tests that have not been updated in a long time. For example if you have an old test that is no longer run and will not be updated again, but would like to keep the data around for historical purposes. You can filter measurement metadata based on time with the following special time filters:

Filter

Description

time

Match a measurement last updated at the exact time given as a UNIX timestamp

time-start

Match only measurements that were updated after the given time (inclusive). If time-end nor time-range is defined, then it will return all results from the start time to the current time. In UNIX timestamp format.

time-end

Match only data that was measured before the given time (inclusive). If time-start nor time-range is provided, then will return all data stored in the archive up to and including the end time. In UNIX timestamp format.

time-range

Only return results that have been updated in the given number of seconds in the past. If time-start nor end-time is defined, then it is the number of seconds in the past from the current time. If only time-start is defined then it is the number of seconds after time-start to search. If only time-end is provided it is the number of seconds before end time to search. If both time-start and time-end are defined, this value is ignored.

Examples of various combinations of the parameters above are provided below:

Match all measurement metadata updated since April 14, 2014 12:00GMT

curl "http://archive.example.net/esmond/perfsonar/archive/?time-start=1397476800"

Match all measurement metadata updated before April 14, 2014 12:00GMT

curl "http://archive.example.net/esmond/perfsonar/archive/?time-end=1397476800"

Match all measurement metadata updated at exactly April 14, 2014 12:00GMT

curl "http://archive.example.net/esmond/perfsonar/archive/?time=1397476800"

Match all measurement metadata updated between April 14, 2014 12:00GMT and April 15, 2014 12:00GMT

curl "http://archive.example.net/esmond/perfsonar/archive/?time-start=1397476800&time-end=1397563200"

Match all throughput metadata with source 10.1.1.1 AND destination 10.1.1.2 updated in the last 24 hours

curl "http://archive.example.net/esmond/perfsonar/archive/?time-range=86400&event-type=throughput&source=10.1.1.1&destination=10.1.1.2"

Limiting results returned

The following options are available to limit the results returned and do things like pagination of results:

Filter

Description

limit

The maximum number of results to return. If not set then 1000 results are returned.

offset

The number of tests to skip. Useful for pagination.

Examples of these options are provided below:

Return the first 10 results

curl "http://archive.example.net/esmond/perfsonar/archive/?limit=10"

Return the second 10 results

curl "http://archive.example.net/esmond/perfsonar/archive/?limit=10&offset=10"

Ignore the first 10 results and return everything else

curl "http://archive.example.net/esmond/perfsonar/archive/?offset=10"

Retrieving Measurement Results

Base Data vs Summaries

Once you find the measurements with the parameters you want, you need to retrieve the actual results those measurements are collecting. The location of the data is provided by the list of objects in the event-types field. For reference, the event-types object looks something like the following:

{
    "event-types":[
        {
            "base-uri":"/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/packet-retransmits/base",
            "event-type":"packet-retransmits",
            "summaries":[],
            "time-updated":1397482734
        },
        {
            "base-uri":"/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/throughput/base",
            "event-type":"throughput",
            "summaries":[
                {
                    "summary-type":"average",
                    "summary-window":"86400",
                    "time-updated":1397482735,
                    "uri":"/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/throughput/averages/86400"
                }
            ],
            "time-updated":1397482735
        },
        {
            "base-uri":"/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/failures/base",
            "event-type":"failures",
            "summaries":[],
            "time-updated":1397315930
        },
        {
            "base-uri":"/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/throughput-subintervals/base",
            "event-type":"throughput-subintervals",
            "summaries":[],
            "time-updated":1397482735
        }
    ]
}

You will notice all of the objects have a base-uri field and a few have objects have a summaries list that also contain a URI. In the archive there are two types of data: base data and summarized data. Base data is exactly what is written to the archive when the measurement is performed, the server does not transform it in anyway. In contrast, summarized data is that which was transformed in some way by the server. All summarized data has a summary type and summary window. The summary window is the timeframe in seconds described by the summary. A summary window of 0 means it is a direct transformation of the base data (i.e. there should be a one-to-one mapping in the number of base data points and summary data points). The summary type must be one of the following:

  • aggregation - The data was combined in a context specific way. For example, if the underlying type is numeric it is the sum of all data points in the summary window. If its a histogram it is a union of the two histograms.

  • average - The statistical average of a series of numbers

  • statistics - Currently only applies to the histogram type, but contains common statistical measures of data over the summary window such as minimum, maximum, mean and median.

Summary data such as aggregation and average over large time windows can be a useful way to grab data over long periods of time as it should result in a smaller data set returned than the base data returned over the same timeframe. The statistics summary can be useful even on base data as it provides additional information about each data point. Querying base or summary data depends on the use case.

Retrieving time series data

Once you have decided whether you want base or statistical data, retrieving it is simply a matter of doing an HTTP GET to the provide URI. For example, to get all the base throughput data for a particular test, you can run:

curl "http://archive.example.net/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/throughput/base"

In general you will want to filter data based on time and you can do so with the following GET parameters (notice they have the same names and meaing as we used to search the measurement metadata):

Filter

Description

time

Match a result recorded at the exact time given (represented as a UNIX timestamp)

time-start

Match only results recorded after the given time (inclusive). If time-end nor time-range is defined, then it will return all results from the start time to the current time. In UNIX timestamp format.

time-end

Match only data that was measured before the given time (inclusive). If time-start nor time-range is provided, then will return all data stored in the archive up to and including the end time. In UNIX timestamp format.

time-range

Only return results that have been recorded in the given number of seconds in the past. If time-start nor end-time is defined, then it is the number of seconds in the past from the current time. If only time-start is defined then it is the number of seconds after time-start to search. If only time-end is provided it is the number of seconds before end time to search. If both time-start and time-end are defined, this value is ignored.

For example, you can get the last 24 hours of data with the following:

curl "http://archive.example.net/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/throughput/base?time-range=86400"

This will return an array of time series object with two fields: ts containing the unix timestamp when the measurement was run and val containing the result of the object. For example:

[
    {
        "ts":1397421672,
        "val":7016320000.0
    },
    {
        "ts":1397442692,
        "val":7225480000.0
    },
    {
        "ts":1397466492,
        "val":7095460000.0
    },
    {
        "ts":1397482700,
        "val":7042540000.0
    }
]

The format of val depends on the event type (and in some cases the summary-type as well), some are numeric while others are JSON objects. The next section describes common event types and how to retrieve data.

Querying Throughput

Event Type(s): throughput

Throughput is a series of integer values always in bits per second. There may be average summaries but in general you will likely query the base data if the throughput tests only run a few times a day. You can do this with a query like the following to get the last 24 hours of throughput data:

curl "http://archive.example.net/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/throughput/base?time-range=86400"

Results:

[
    {
        "ts":1397421672,
        "val":7016320000.0
    },
    {
        "ts":1397442692,
        "val":7225480000.0
    },
    {
        "ts":1397466492,
        "val":7095460000.0
    },
    {
        "ts":1397482700,
        "val":7042540000.0
    }
]

Querying Delay/One-way Delay

Event Type(s): histogram-rtt, histogram-owdelay

Delay values are stored in a histogram where the histogram bucket is the number of milliseconds measured and the value is the number of packets that were measured to have that value. Delay in terms of the round trip time reported by ping is represented with the event-type histogram-delay. One-way delay is represented as “histogram-owdelay”. The format of their histograms is exactly the same. Examples of query the 24 hours of base data are below:

Ping Round Trip Time

curl "http://archive.example.net/esmond/perfsonar/archive/2355e337a7214611ab1bc5db51e40424/histogram-rtt/base?time-range=86400"

Owamp One-way Delay

curl "http://archive.example.net/esmond/perfsonar/archive/fce0483e51de49aaa7fcf8884d053134/histogram-owdelay/base?time-range=86400"

Results will look something like the following:

[
    {
        "ts":1397504013,
        "val":{
            "34.4":506,
            "34.5":85,
            "34.6":5,
            "34.7":4
        }
    },
    {
        "ts":1397504052,
        "val":{
            "34.4":510,
            "34.5":80,
            "34.6":7,
            "34.7":3
        }
    },
    .....
]

You may interpret the results as for the packet sample starting at time 1397504013 there were 506 packets that took 34.4ms, 85 that took 34.5ms, 5 that too 34.6, etc. Delay tests can run rather frequently thus it can be very useful to use summarized data. Aggregation summaries combine all the histograms in a given time window. For example a histogram for 24 hours may look like the following:

curl "http://archive.example.net/esmond/perfsonar/archive/fce0483e51de49aaa7fcf8884d053134/histogram-owdelay/aggregations/86400"
[
    {
        "ts":1396915200,
        "val":{
            "34.2":3,
            "34.3":38814,
            "34.4":114820,
            "34.5":54190,
            "34.6":7842,
            "34.7":9595,
            "34.8":741,
            "34.9":298,
            "35":185,
            "35.1":158,
            "35.2":112,
            "35.3":61,
            "35.4":40,
            "35.5":19,
        }
    },
    ...
]

Another useful summary for the delay histograms is statistics. This calculates common statistical measures of the data. An example of the statistical summaries for each base data point (i.e. summary-window equals 0) is as follows where the field names correspond to standard statistical measures:

curl "http://archive.example.net/esmond/perfsonar/archive/fce0483e51de49aaa7fcf8884d053134/histogram-owdelay/statistics/0"
[
    {
        "ts":1397504795,
        "val":{
            "maximum":"34.4",
            "mean":34.4,
            "median":34.4,
            "minimum":"34.4",
            "mode":[
            "34.4"
            ],
            "percentile-25":34.4,
            "percentile-75":34.4,
            "percentile-95":34.4,
            "standard-deviation":0.0,
            "variance":0.0
        }
    },
    {
        "ts":1397504835,
        "val":{
            "maximum":"34.4",
            "mean":34.38233333333333,
            "median":34.4,
            "minimum":"34.3",
            "mode":[
            "34.4"
            ],
            "percentile-25":34.4,
            "percentile-75":34.4,
            "percentile-95":34.4,
            "standard-deviation":0.03813863599495395,
            "variance":0.001454555555555597
        }
    },
...
]

Querying Packet Loss

Event Type(s): packet-loss-rate Packet loss rate measures the number of packets lost over the number of packets sent. It is represented as a floating point number between 0 and 1 where 0 equals 0% packet loss and 1 equals 100% packet loss. You can query the base packet loss data using the packet-loss-rate event type such as in the request below:

curl "http://archive.example.net/esmond/perfsonar/archive/fce0483e51de49aaa7fcf8884d053134/packet-loss-rate/base"
[
    {
        "ts":1397555532,
        "val":0.04666666666666667
    },
    {
        "ts":1397555538,
        "val":0.06666666666666667
    },
    {
        "ts":1397555613,
        "val":0.0
    },
    {
        "ts":1397555619,
        "val":0.0
    }
]

Packet-loss can also have an aggregation summary that give the packet loss percentage over the given summary window.

Querying Packet Traces

Event Type(s): packet-trace The results of a traceroute or tracepath measurement are stored under the packet-trace event type. The result is an array of objects describing the result of each traceroute or tracepath probe. For example:

curl http://archive.example.net/esmond/perfsonar/archive/641860b2004c46a7b21fe26e5ffea9af/packet-trace/base?time-range=600
[
    {
        "ts":1397566094,
        "val":[
            {
                "error_message":null,
                "ip":"198.124.238.65",
                "mtu":"9000",
                "query":"1",
                "rtt":"0.246",
                "success":1,
                "ttl":"1"
            },
            {
                "error_message":null,
                "ip":"198.124.238.65",
                "mtu":"9000",
                "query":"2",
                "rtt":"0.195",
                "success":1,
                "ttl":"1"
            },
            {
                "error_message":null,
                "ip":"134.55.38.77",
                "mtu":"9000",
                "query":"1",
                "rtt":"22.159",
                "success":1,
                "ttl":"2"
            },
            {
                "error_message":null,
                "ip":"134.55.42.41",
                "mtu":"9000",
                "query":"1",
                "rtt":"22.430",
                "success":1,
                "ttl":"3"
            },
            {
                "error_message":null,
                "ip":"134.55.43.82",
                "mtu":"9000",
                "query":"1",
                "rtt":"33.548",
                "success":1,
                "ttl":"4"
            },
            {
                "error_message":null,
                "ip":"134.55.49.57",
                "mtu":"9000",
                "query":"1",
                "rtt":"44.019",
                "success":1,
                "ttl":"5"
            },
            {
                "error_message":null,
                "ip":"134.55.50.201",
                "mtu":"9000",
                "query":"1",
                "rtt":"65.203",
                "success":1,
                "ttl":"6"
            },
            {
                "error_message":null,
                "ip":"134.55.40.6",
                "mtu":"9000",
                "query":"1",
                "rtt":"67.694",
                "success":1,
                "ttl":"7"
            },
            {
                "error_message":null,
                "ip":"134.55.49.2",
                "mtu":"9000",
                "query":"1",
                "rtt":"68.914",
                "success":1,
                "ttl":"8"
            },
            {
                "error_message":null,
                "ip":"198.129.254.30",
                "mtu":"9000",
                "query":"1",
                "rtt":"68.887",
                "success":1,
                "ttl":"9"
            }
        ]
    }
]

The object fields have the following meaning:

Field Name

Description

error-message

A string indicating if an error occurred for the probe. It is null if success is 1 and should be populated if success is 0.

ip

The IP address returned by the probe

mtu

The maximum transmission unit measured by the probe. This is only populated for tracepath tests and will be null if not measured.

query

For a given ttl a tool may send multiple probes. This distinguishes between probes with the same ttl.

rtt

The round trip time measured by the probe in milliseconds.

success

A boolean indicating if the probe succeeded. If it did not, then further details can be found in error_message.

ttl

The time-to-live set in the IP headers of the probe. Traceroute and tracepath gradually increase this value to measure the path. The list will always be sorted by ttl.

There are no summaries supported for the packet-trace type currently.

Querying Subinterval Data

Event Type(s): throughput-subintervals, packet-retransmits-subintervals

Data such as throughput and packet retransmits is also available for subintervals of an individual test. No summarizations are avilable for this data type.

curl "http://archive.example.net/esmond/perfsonar/archive/f6b732e9f351487a96126f0c25e5e546/packet-retransmits-subintervals/base?time-range=86400"

Results:

[
   {
      "ts":1419471577,
      "val":[
         {
            "duration":"1.000000",
            "start":"0.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"1.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"2.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"3.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"4.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"5.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"6.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"7.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"8.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"9.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"10.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"11.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"12.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"13.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"14.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"15.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"16.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"17.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"18.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"19.000000",
            "val":0
         }
      ]
   },
   {
      "ts":1419493946,
      "val":[
         {
            "duration":"1.000000",
            "start":"0.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"1.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"2.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"3.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"4.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"5.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"6.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"7.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"8.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"9.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"10.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"11.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"12.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"13.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"14.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"15.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"16.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"17.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"18.000000",
            "val":0
         },
         {
            "duration":"1.000000",
            "start":"19.000000",
            "val":0
         }
      ]
   }
]

Publishing Data

Getting Started

The measurement archive defines a REST API for publishing data via HTTP POST requests. Much like querying data there are two steps to this process:

  1. Publish the measurement description and get the event-type URIs used for posting measurement results

  2. Using the URIs from step one, publish the measurement results

A quick example demonstrates this process. First we post a description of our measurement, called the measurement metadata with the following request:

curl -X POST --dump-header - -H "Content-Type: application/json" -H "Authorization: Token b3ba46b99e2ed8a267a409f3c4379238305ccaf2" --data '{"subject-type": "point-to-point", "source": "10.1.1.1", "destination": "10.1.1.2", "tool-name": "bwctl/iperf3", "measurement-agent": "110.1.1.1", "input-source": "host1.example.net","input-destination": "host2.example.net","time-duration": 30,"ip-transport-protocol": "tcp","event-types": [{"event-type": "throughput","summaries":[{"summary-type": "aggregation","summary-window": 3600},{"summary-type": "aggregation","summary-window": 86400}]},{"event-type": "packet-retransmits","summaries":[]}]}' http://archive.example.net/esmond/perfsonar/archive/

Notice we set the HTTP Authorization header since writing data generally will require some sort of authentication. See Authentication and Authorization for more details. The body is a JSON object describing the metadata. The result back is our metadata object with additional information such as the URIs where we can publish/retrieve information on the measurement and its results:

{
   "destination":"10.1.1.2",
   "event-types":[
      {
         "base-uri":"/esmond/perfsonar/archive/2ba58a26aee64a1e94cd2b5bacbb2cc6/packet-retransmits/base",
         "event-type":"packet-retransmits",
         "summaries":[

         ],
         "time-updated":null
      },
      {
         "base-uri":"/esmond/perfsonar/archive/2ba58a26aee64a1e94cd2b5bacbb2cc6/throughput/base",
         "event-type":"throughput",
         "summaries":[
            {
               "summary-type":"aggregation",
               "summary-window":"3600",
               "time-updated":null,
               "uri":"/esmond/perfsonar/archive/2ba58a26aee64a1e94cd2b5bacbb2cc6/throughput/aggregations/3600"
            },
            {
               "summary-type":"aggregation",
               "summary-window":"86400",
               "time-updated":null,
               "uri":"/esmond/perfsonar/archive/2ba58a26aee64a1e94cd2b5bacbb2cc6/throughput/aggregations/86400"
            }
         ],
         "time-updated":null
      }
   ],
   "input-destination":"host2.example.net",
   "input-source":"host1.example.net",
   "ip-transport-protocol":"tcp",
   "measurement-agent":"110.1.1.1",
   "metadata-key":"2ba58a26aee64a1e94cd2b5bacbb2cc6",
   "source":"10.1.1.1",
   "subject-type":"point-to-point",
   "time-duration":"30",
   "tool-name":"bwctl/iperf3",
   "uri":"/esmond/perfsonar/archive/2ba58a26aee64a1e94cd2b5bacbb2cc6/"
}

We can now publish a single data point to one of the URIs defined by a base-uri field (NOTE: We can NOT publish to a summary URL as all summaries are performed by the server). We send a simple time-series object with a UNIX timestamp indicating when the measurement was run and the value of the result:

curl -X POST --dump-header - -H "Content-Type: application/json" -H "Authorization: Token b3ba46b99e2ed8a267a409f3c4379238305ccaf2" --data '{"ts": "1392238294", "val": "1000000000"}' http://archive.example.net/esmond/perfsonar/archive/2ba58a26aee64a1e94cd2b5bacbb2cc6/throughput/base

Alternatively, we can publish measurement results from multiple times and with multiple event-types in the following bulk request:

curl -X PUT --dump-header - -H "Content-Type: application/json" -H "Authorization: Token b3ba46b99e2ed8a267a409f3c4379238305ccaf2" --data '{"data": [{"ts": 1392238390, "val": [{"event-type": "throughput","val": 1000000000}, {"event-type": "packet-retransmits","val": 10}]}, {"ts": 1392238390, "val": [{"event-type": "throughput","val": 900000000}, {"event-type": "packet-retransmits","val": 5}]}]}' http://esmond-dev/perfsonar/archive/2ba58a26aee64a1e94cd2b5bacbb2cc6/

See the remainder of this section for more details one each of these steps.

Authentication and Authorization

Writing data generally requires some form of authentication and authorization. IP authentication is one option that does not require any modification to the message. The measurement archive supports the use of the HTTP Authorization header with an authorization string the form of Token <api-key> where <api-key> is the authentication credential. It is also recommended all requests be sent over HTTPS since otherwise these credentials will be sent in plain text. More information on obtaining an API key can be found here.

Publishing the Measurement Description

The first step to publishing data is to send a metadata object describing the measurement and the types of results it will collect. It looks very similar to the measurement descriptions returned by a query. When you register though, you do not provide the metadata-key nor any of the URIs as these will be generated by the server. All requests are sent as an HTTP POST to the top-level URL (usually ending with /esmond/perfsonar/archive). The metadata object MUST contain a subject-type field and a list of event-types. If the subject-type is point-to-point then the following fields are additionally required:

Field name

Type

Description

source

IP address

The sender in a point-to-point measurement represented as an IPv4 or IPv6 address. It MUST be in the form of an IP address when registering (unlike querying where you can search by DNS name as well)

destination

IP address

The receiver in a point-to-point measurement represented as an IPv4 or IPv6 address. It MUST be in the form of an IP address when registering (unlike querying where you can search by DNS name as well)

measurement-agent

IP address

The host where the measurement was initiated represented as an IPv4 or IPv6 address. This may be the source, destination or a third-party host depending on the tool. It MUST be in the form of an IP address when registering (unlike querying where you can search by DNS name as well)

input-source

string

A string indicating exactly how the source address is passed to the tool.

input-destination

string

A string indicating exactly how the destination address is passed to the tool. .

tool-name

string

A string indicating the name of the tool that produced the measurement. Examples include bwctl/iperf, bwctl/iperf or powstream.

The objects in the event-types array provided each have two fields:

Field name

Type

Description

event-type

String

String indicating the type of data. See Full List of Event Types.

summaries

Array of Summary objects

The list of summaries to be performed. if no summaries than this can be an empty list.

The summary objects have the following fields:

Field name

Type

Description

summary-type

String

The type of summary to be performed.

summary-window

Integer

The number of seconds indicating the time period over which data is summarized

After sending the request, the HTTP status code will indicate the result. If it succeed you will receive an HTTP 200 status code with the created metadata object including the generated metadata-key and URIs for each event-type. One feature of the Measurement Archive that can be useful is that if an existing measurement exactly matches one posted (i.e. same parameters and same even types) than that object is returned. This prevents the need of registration clients to keep local state of the URIs used to publish data. They can simply re-register the metadata each time and get back the existing metadata object if there is one.

Publishing a Single Measurement Result

You can publish a single measurement by sending a HTTP POST to one of the values in the event-type base-uri fields of the metadata object we created. This HTTP body contains a JSON object with two fields:

Field name

Type

Description

ts

UNIX Timestamp

A UNIX timestamp of when the measurement was performed.

val

Depends on event-type

The value of the measurement whose type depends on the event-type

The HTTP status code indicates success or failure. HTTP 200 means the measurement was published and there will be no JSON body. If the request fails for any reason, an non-200 status code is set and the cody will contain a JSON object with a single error field containing a message describing the error.

Publishing Multiple Measurement Results

It may be desirable to publish data points for multiple timestamps and/or multiple event types in the same request. This type of bulk request contains an object with a data field contain an array of the data to be published. The array contains a series of time-series objects with a ts and a val just like in the single-measurement case but the val of each object takes the following form:

Field name

Type

Description

event-type

String

The event-type of the measurement being published

val

Depends on event-type

The value of the measurement whose type depends on the event-type. See Full List of Event Types.

A formatted example that registers throughput and packet-retransmits event types for two times is provided below:

{
   "data":[
      {
         "ts":1392238390,
         "val":[
            {
               "event-type":"throughput",
               "val":1000000000
            },
            {
               "event-type":"packet-retransmits",
               "val":10
            }
         ]
      },
      {
         "ts":1392238390,
         "val":[
            {
               "event-type":"throughput",
               "val":900000000
            },
            {
               "event-type":"packet-retransmits",
               "val":5
            }
         ]
      }
   ]
}

In the response, the HTTP status code indicates success or failure. HTTP 200 means the measurement was published and there will be no JSON body. If the request fails for any reason, an non-200 status code is set and the cody will contain a JSON object with a single error field containing a message describing the error.

Examples

Publishing Throughput Data

An example of throughput metadata as published for BWCTL running iperf3 by the perfSONAR Regular Testing component:

{
   "tool-name":"bwctl/iperf3",
   "source":"10.1.1.1",
   "measurement-agent":"10.1.1.1",
   "destination":"10.1.1.2",
   "ip-transport-protocol":"tcp",
   "time-duration":"20",
   "event-types":[
      {
         "event-type":"failures"
      },
      {
         "event-type":"packet-retransmits"
      },
      {
         "event-type":"throughput",
         "summaries":[
            {
               "summary-type":"average",
               "summary-window":"86400"
            }
         ]
      },
      {
         "event-type":"throughput-subintervals"
      }
   ],
   "bw-parallel-streams":"1",
   "subject-type":"point-to-point",
   "input-destination":"host1.example.net",
   "input-source":"host2.example.net"
}

Example of publishing the measurement results to the bulk interface as done by the perfSONAR regular testing component:

{
   "data":[
      {
         "ts":1397807404,
         "val":[
            {
               "event-type":"packet-retransmits",
               "val":"112"
            },
            {
               "event-type":"throughput",
               "val":"8446270000"
            },
            {
               "event-type":"throughput-subintervals",
               "val":[
                  {
                     "val":"47619700",
                     "duration":"1.034930",
                     "start":"0.000000"
                  },
                  {
                     "val":"584518000",
                     "duration":"0.972302",
                     "start":"1.034930"
                  },
                  {
                     "val":"5186490000",
                     "duration":"0.993889",
                     "start":"2.007230"
                  },
                  {
                     "val":"9970380000",
                     "duration":"0.999317",
                     "start":"3.001120"
                  },
                  {
                     "val":"9441540000",
                     "duration":"0.999761",
                     "start":"4.000440"
                  },
                  {
                     "val":"9181440000",
                     "duration":"0.999988",
                     "start":"5.000200"
                  },
                  {
                     "val":"9606770000",
                     "duration":"1.000250",
                     "start":"6.000190"
                  },
                  {
                     "val":"9770360000",
                     "duration":"0.999813",
                     "start":"7.000440"
                  },
                  {
                     "val":"9752390000",
                     "duration":"0.999935",
                     "start":"8.000250"
                  },
                  {
                     "val":"9726870000",
                     "duration":"1.000190",
                     "start":"9.000180"
                  },
                  {
                     "val":"9824500000",
                     "duration":"0.999853",
                     "start":"10.000400"
                  },
                  {
                     "val":"9851140000",
                     "duration":"1.000130",
                     "start":"11.000200"
                  },
                  {
                     "val":"9806560000",
                     "duration":"0.999972",
                     "start":"12.000400"
                  },
                  {
                     "val":"9754530000",
                     "duration":"1.000150",
                     "start":"13.000300"
                  },
                  {
                     "val":"9854340000",
                     "duration":"0.999805",
                     "start":"14.000500"
                  },
                  {
                     "val":"9809550000",
                     "duration":"1.000090",
                     "start":"15.000300"
                  },
                  {
                     "val":"9813970000",
                     "duration":"1.000070",
                     "start":"16.000400"
                  },
                  {
                     "val":"9001800000",
                     "duration":"0.999908",
                     "start":"17.000400"
                  },
                  {
                     "val":"9043970000",
                     "duration":"0.999884",
                     "start":"18.000400"
                  },
                  {
                     "val":"8886000000",
                     "duration":"1.002790",
                     "start":"19.000200"
                  },
                  {
                     "val":"9430650000",
                     "duration":"0.067380",
                     "start":"20.003000"
                  }
               ]
            }
         ]
      }
   ]
}

Publishing Delay/One-way Delay Data

An example of delay metadata as published for BWCTL running ping by the perfSONAR Regular Testing component:

{
   "tool-name":"bwctl/ping",
   "source":"10.1.1.1",
   "measurement-agent":"10.1.1.1",
   "destination":"10.1.1.2",
   "ip-transport-protocol":"icmp",
   "time-probe-interval":1,
   "ip-packet-size":1000,
   "event-types":[
      {
         "event-type":"failures"
      },
      {
         "event-type":"histogram-ttl-reverse",
         "summaries":[
            {
               "summary-type":"statistics",
               "summary-window":"0"
            }
         ]
      },
      {
         "event-type":"packet-duplicates-bidir"
      },
      {
         "event-type":"packet-loss-rate-bidir",
         "summaries":[
            {
               "summary-type":"aggregation",
               "summary-window":"3600"
            },
            {
               "summary-type":"aggregation",
               "summary-window":"86400"
            }
         ]
      },
      {
         "event-type":"packet-count-lost-bidir"
      },
      {
         "event-type":"packet-count-sent"
      },
      {
         "event-type":"histogram-rtt",
         "summaries":[
            {
               "summary-type":"aggregation",
               "summary-window":"86400"
            },
            {
               "summary-type":"statistics",
               "summary-window":"86400"
            },
            {
               "summary-type":"statistics",
               "summary-window":"0"
            }
         ]
      },
      {
         "event-type":"packet-reorders-bidir"
      }
   ],
   "subject-type":"point-to-point",
   "input-destination":"host2.example.net",
   "sample-size":"100",
   "input-source":"host1.example.net"
}

Similarly, metadata example for powstream as registered by the perfSONAR Regular Testing component (note the slightly different event types from ping since they actually measure different values):

{
   "tool-name":"powstream",
   "source":"10.1.1.1",
   "measurement-agent":"10.1.1.1",
   "destination":"10.1.1.2",
   "ip-transport-protocol":"udp",
   "time-duration":60,
   "time-probe-interval":0.1,
   "sample-bucket-width":"0.0001",
   "event-types":[
      {
         "event-type":"failures"
      },
      {
         "event-type":"histogram-ttl",
         "summaries":[
            {
               "summary-type":"statistics",
               "summary-window":"0"
            }
         ]
      },
      {
         "event-type":"packet-duplicates"
      },
      {
         "event-type":"packet-loss-rate",
         "summaries":[
            {
               "summary-type":"aggregation",
               "summary-window":"3600"
            },
            {
               "summary-type":"aggregation",
               "summary-window":"86400"
            }
         ]
      },
      {
         "event-type":"packet-count-lost"
      },
      {
         "event-type":"packet-count-sent"
      },
      {
         "event-type":"histogram-owdelay",
         "summaries":[
            {
               "summary-type":"aggregation",
               "summary-window":"3600"
            },
            {
               "summary-type":"statistics",
               "summary-window":"3600"
            },
            {
               "summary-type":"aggregation",
               "summary-window":"86400"
            },
            {
               "summary-type":"statistics",
               "summary-window":"86400"
            },
            {
               "summary-type":"statistics",
               "summary-window":"0"
            }
         ]
      },
      {
         "event-type":"time-error-estimates"
      }
   ],
   "time-interval":0,
   "subject-type":"point-to-point",
   "input-destination":"host2.example.net",
   "sample-size":600,
   "input-source":"host1.example.net"
}

Example of publishing the ping measurement results to the bulk interface as done by the perfSONAR regular testing component:

{
   "data":[
      {
         "ts":1397804761,
         "val":[
            {
               "event-type":"histogram-ttl-reverse",
               "val":{
                  "59":100
               }
            },
            {
               "event-type":"packet-duplicates-bidir",
               "val":0
            },
            {
               "event-type":"packet-loss-rate-bidir",
               "val":{
                  "denominator":"100",
                  "numerator":"0"
               }
            },
            {
               "event-type":"packet-count-lost-bidir",
               "val":"0"
            },
            {
               "event-type":"packet-count-sent",
               "val":"100"
            },
            {
               "event-type":"histogram-rtt",
               "val":{
                  "41.00":99,
                  "41.10":1
               }
            },
            {
               "event-type":"packet-reorders-bidir",
               "val":0
            }
         ]
      }
   ]
}

Similarly an example of publishing the ping and powstream measurement results to the bulk interface as done by the perfSONAR regular testing component:

{
   "data":[
      {
         "ts":1397807372,
         "val":[
            {
               "event-type":"histogram-ttl",
               "val":{
                  "59":"600"
               }
            },
            {
               "event-type":"packet-duplicates",
               "val":"0"
            },
            {
               "event-type":"packet-loss-rate",
               "val":{
                  "denominator":"600",
                  "numerator":"0"
               }
            },
            {
               "event-type":"packet-count-lost",
               "val":"0"
            },
            {
               "event-type":"packet-count-sent",
               "val":"600"
            },
            {
               "event-type":"histogram-owdelay",
               "val":{
                  "34.5":"30",
                  "34.3":"440",
                  "34.6":"7",
                  "34.4":"123"
               }
            },
            {
               "event-type":"time-error-estimates",
               "val":"0.000124"
            }
         ]
      }
   ]
}

Publishing Packet Loss

A special note about packet loss: packet loss is currently published for multiple tools such as ping, UDP throughput tests, and owamp(powstream or owping). Packet loss is a percentage type and the MA provides a special format for registering such values to make summarization possible. Instead of registering the float value, you register the numerator and denominator, in this case packets lost and packets sent respectively. Below is the packet-loss portion extracted from one-way delay example above:

...
{
    "event-type":"packet-loss-rate",
    "val":{
        "denominator":"600",
        "numerator":"0"
    }
},
...

Publishing Packet Traces

An example of packet trace metadata as published for BWCTL running tracepath by the perfSONAR Regular Testing component:

{
   "tool-name":"bwctl/tracepath",
   "source":"10.1.1.1",
   "measurement-agent":"10.1.1.1",
   "destination":"10.1.1.2",
   "ip-transport-protocol":"icmp",
   "event-types":[
      {
         "event-type":"failures"
      },
      {
         "event-type":"packet-trace"
      },
      {
         "event-type":"path-mtu"
      }
   ],
   "subject-type":"point-to-point",
   "input-destination":"host1.example.net",
   "input-source":"host2.example.net"
}

Similarly an example of publishing the BWCTL tracepath measurement results to the bulk interface as done by the perfSONAR regular testing component:

{
   "data":[
      {
         "ts":1397804940,
         "val":[
            {
               "event-type":"packet-trace",
               "val":[
                  {
                     "success":1,
                     "error_message":null,
                     "ip":"10.1.1.1",
                     "query":"1",
                     "ttl":"1",
                     "rtt":"0.278",
                     "mtu":"9000"
                  },
                  {
                     "success":1,
                     "error_message":null,
                     "ip":"10.1.1.10",
                     "query":"1",
                     "ttl":"2",
                     "rtt":"22.243",
                     "mtu":"9000"
                  },
                  {
                     "success":1,
                     "error_message":null,
                     "ip":"10.1.1.12",
                     "query":"1",
                     "ttl":"3",
                     "rtt":"22.516",
                     "mtu":"9000"
                  },
                  {
                     "success":1,
                     "error_message":null,
                     "ip":"10.1.1.2",
                     "query":"1",
                     "ttl":"4",
                     "rtt":"33.562",
                     "mtu":"9000"
                  }
               ]
            },
            {
               "event-type":"path-mtu",
               "val":"9000"
            }
         ]
      }
   ]
}

Full List of Event Types

A few of the common event types have been covered in previous sections, but a full list is provided below for reference (NOTE: See API specification for more formal definitions of each type):

Name

Description

failures

A record of test failures. A failure is any measurement that was scheduled to run but circumstances led to a state where it is unable to record a measurement. For example, being unable to connect to the remote endpoint. This is an object currently with one field named error.

histogram-owdelay

A histogram describing the observed one-way delays over a time period. Buckets always in milliseconds.

histogram-rtt

A histogram describing the observed packet round-trip times over a over a time period. Buckets always in milliseconds.

histogram-ttl

A histogram describing the observed number of hops (time-to-live) of packets over a time period from source to destination.

histogram-ttl-reverse

A histogram describing the observed number of hops (time-to-live) of packets over a time period from destination to source.

ntp-delay

The round trip delay time to the NTP server in milliseconds.

ntp-dispersion

The maximum error of the local clock relative to the NTP reference clock in milliseconds.

ntp-jitter

Short-term variations in the clock frequency. The RMS deviation of the NTP offset in milliseconds.

ntp-offset

The time difference between the system clock and the NTP reference clock in milliseconds.

ntp-polling-interval

The NTP polling interval in seconds.

ntp-reach

An integer representing the reachability register, which is technically an octal value. If all is well and NTP has been running for a while, this should read 377. It may be lower during startup or if the NTP servers is unreachable on some attempts.

ntp-stratum

An integer indicating the NTP stratum of the local host (number of servers to a reference clock). 1=Primary (has a hardware clock), 2-15=Secondary reference (via NTP), 16=Unsynchronized

ntp-wander

Long-term variations in NTP RMS frequency jitter in PPM (parts per million) - a measure of long-term clock stability.

packet-duplicates

The number of duplicate packets observed in a sample for a single direction.

packet-duplicates-bidir

The number of duplicate packets observed for a complete packet round trip (from source to destination and then back to source)

packet-loss-rate

The number of packets lost divided by the number of packets sent.

packet-loss-rate-bidir

The number of packets lost in both directions divided by the number of packets sent over a given summarization window.

packet-trace

The observed packet trace such as that returned by traceroute or tracepath.

packet-count-lost

The number of packets dropped in one direction. This is a raw count of packets and can be combined with packet­count­sent event type data to determine the rate of unidriectional loss.

packet-count-lost-bidir

The number of packets dropped in both directions. This is a raw count of packets and can be combined with packet­count­sent event type data to determine the rate of biidriectional loss.

packet-count-sent

The number of packets sent in a sample. This is a raw count of packets and can be combined with packet-count-lost event type data to determine the rate of loss.

packet-reorders

The number of packets received out of order for a unidirectional transfer

packet-reorders-bidir

The number of packets received out of order for a bidirectional transfer

packet-retransmits

The number of packets retransmitted for a transfer using reliable transport protocol such as TCP.

packet-retransmits-subintervals

The number of packets retransmitted per subinterval of time

path-mtu

The maximum transmission unit of a path.

streams-packet-retransmits

For tests running multiple streams, the packet-retransmits for each individual stream. Each stream is represented as a position in an array. If other stream- stats collected, a stream will maintain the same position in each event type.

streams-packet-retransmits-subintervals

For tests running multiple streams, the packet restransmit subintervals for each inividual stream. Each stream is represented as a position in an array. If other stream- stats collected, a stream will maintain the same position in each event type

streams-throughput

For tests running multiple streams, the throughput for each individual stream. Each stream is represented as a position in an array. If other stream- stats collected, a stream should maintain the same position in each event type.

streams-throughput-subintervals

For tests running multiple streams, the throughput subintervals for each inividual stream. Each stream is represented as a position in an array. If other stream- stats collected, a stream will maintain the same position in each event type

throughput

The observed amount of data sent over a period of time. Throughput must be in bits per second(bps).

throughput-subintervals

The throughput for individual subintervals of a throughput test

time-error-estimates

An estimate of the clock error in a sample in milliseconds

Programming Language Libraries

Full API Specification